The following table describes the labels in this screen.
Table 75 Policy: Summary Table
LABEL
Rule Usage
Index
Active
Name
Classifier(s)
Delete
Cancel
22.4 Policy Example
The figure below shows an example Policy screen where you configure a policy to limit bandwidth on a
traffic flow classified using the Example classifier (refer to
Chapter 22 Policy Rule
DESCRIPTION
This field displays how many rules have been configured on the Switch.
This field displays the policy index number. Click an index number to edit the policy.
This field displays Yes when policy is activated and No when is it deactivated.
This field displays the name you have assigned to this policy.
This field displays the name(s) of the classifier to which this policy applies.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
MES3500-24S/MGS3520 Series User's Guide
Section 21.4 on page
187
182).