Table of Contents
Advertisement
Go to Advanced Application > VLAN > Static VLAN, and create a VLAN with ID of 100. Add ports 5, 6
2
and 7 in the VLAN by selecting Fixed in the Control field as shown.
Deselect Tx Tagging because you don't want outgoing traffic to contain this VLAN tag.
Click Add.
Go to Advanced Application > VLAN > VLAN Port Setting, and set the PVID of the ports 5, 6 and 7 to 100.
3
This tags untagged incoming frames on ports 5, 6 and 7 with the tag 100.
Go to Advanced Application > IP Source Guard > DHCP snooping > Configure, activate and specify
4
VLAN 100 as the DHCP VLAN as shown. Click Apply.
Chapter 6 Tutorials
MES3500-24S/MGS3520 Series User's Guide
48
Advertisement
Table of Contents
Troubleshooting
