Table of Contents
Advertisement
Figure 94. Front bezel installation
a.
Align the three plastic tabs on the right side of the front bezel with the corresponding holes
in the chassis.
b.
Pivot the front bezel inward until it snaps into position on the left side.
Install the front door
Use this information to install the front door.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
• Read "Installation guidelines" on page 58 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
Install the front door.
ThinkSystem ST650 V2 Setup Guide
140
Advertisement
Table of Contents
