Install The Front Door - Lenovo ThinkSystem ST250 V2 Maintenance Manual

CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted
with metal, which might result in spattered metal, burns, or both.
Attention:
• Read the "Installation guidelines" on page 85 to ensure that you work safely.
• Turn off the server and peripheral devices, and disconnect the power cords and all external cables (see
"Power off the server" on page 13).
• If the server is in a rack, remove it from the rack.
• Remove any locking device that secures the server cover, such as a Kensington lock or a pad lock.
Watch the procedure
A video of this procedure is available at YouTube:
DoEcxrm2zKNpaKOdZ3f8Qc
Procedure
Step 1. Remove the front door.
a. Turn the cover lock to the unlocked position with the front door key.
b. Open the front door.
c. Lift the front door slightly until you can completely remove it.
Figure 60. Removing the front door
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the front door

Follow instructions in this section to install the front door.
About this task
https://youtube.com/playlist?list=PLYV5R7hVcs-
.
.
Chapter 4 Hardware replacement procedures
125