Table of Contents
Advertisement
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
• Read "Installation guidelines" on page 58 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
• Ensure that all adapters and other components are installed and seated correctly and that you have not
left loose tools or parts inside the server.
• Ensure that all internal cables are correctly routed. See Chapter 3 "Internal cable routing" on page 47.
• If you are installing a new server cover, attach the service label to the inside of the new server cover first if
necessary.
Note: A new server cover comes without a service label attached. If you need a service label, order it
together with the new server cover. The service label is free of charge.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
Install the server cover.
ThinkSystem ST650 V2 Setup Guide
142
Advertisement
Table of Contents
