Table of Contents
Advertisement
http://sysmgt.lenovofiles.com/help/index.jsp?topic=%2FLXPM%2FRAID_setup.html
Install a hot-swap drive
Use this information to install a hot-swap drive.
About this task
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
• Read "Installation guidelines" on page 58 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
The following notes describe the type of drives that your server supports and other information that you must
consider when you install a drive.
• For a complete list of supported optional devices for the server, see:
serverproven/index.shtml
• The drive bays are numbered to indicate the installation order (starting from number "0"). Follow the
installation order when you install a drive. See "Front view" on page 16.
• The drives in a single RAID array must be the same type, same size, and same capacity.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
If the drive bay has a drive filler installed, remove it. Keep the drive filler in a safe place for future
use.
Step 2.
Install the hot-swap drive.
https://static.lenovo.com/us/en/
.
Chapter 4
Server hardware setup
111
Advertisement
Table of Contents
