Table of Contents
Advertisement
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
Locate the applicable PCIe slot. See "Specifications" on page 3 to identify the different types of
PCIe slots in your server.
Note: Ensure that you observe the installation rules and sequence in "Technical rules for PCIe
slots" on page 77.
Step 2.
If a bracket is installed in the PCIe slot, remove it. Store the bracket for the PCIe slot in case that
you later remove the PCIe adapter and need the bracket to cover the place.
Step 3.
Install the PCIe adapter.
Figure 84. PCIe adapter installation
Note: Make sure the PCIe adapter retainer is in the opened position.
a.
Align the PCIe adapter to the PCIe slot; then, gently press both ends of the PCIe adapter
until it is securely seated in the PCIe slot.
b.
Close the PCIe adapter retainer.
Step 4.
Depending on the type of PCIe adapter, you might need to connect one or more cables. Refer to
the documentation that comes with the PCIe adapter for specific information.
After you finish
If you have installed a T4 GPU adapter, install a T4 filler onto the server cover. See "Install a T4 filler" on page
134.
Install a full-length GPU adapter
Use this information to install a full-length GPU adapter.
About this task
S002
.
Chapter 4
Server hardware setup
129
Advertisement
Table of Contents
