Table of Contents
Advertisement
S033
CAUTION:
Hazardous energy present. Voltages with hazardous energy might cause heating when shorted with
metal, which might result in spattered metal, burns, or both.
Attention:
• Read "Installation guidelines" on page 58 to ensure that you work safely.
• Prevent exposure to static electricity, which might lead to system halt and loss of data, by keeping static-
sensitive components in their static-protective packages until installation, and handling these devices with
an electrostatic-discharge wrist strap or other grounding system.
• If the server is in a rack, remove it from the rack.
• If foot stands are installed on the server, rotate them inwards and lay the server on its side for easier
operation.
Watch the procedure. A video of the installation and removal process is available:
• YouTube:
https://youtube.com/playlist?list=PLYV5R7hVcs-DoEcxrm2zKNpaKOdZ3f8Qc
• Youku:
https://list.youku.com/albumlist/show/id_59636516
Procedure
Step 1.
Remove the hot-swap fan.
Figure 48. Hot-swap fan removal
a.
Pinch on the top of the fan, and press on the latch to release the fan from the connector.
b.
Lift the fan out from the fan cage.
Remove the fan cage assembly
Use this procedure to remove the fan cage assembly.
About this task
ThinkSystem ST650 V2 Setup Guide
94
Advertisement
Table of Contents
