Table of Contents
Advertisement
Figure 103. Installing right EIA bracket
Step 5.
Align the holes in the left EIA bracket with the corresponding holes on the bottom of the chassis;
then, use a screwdriver to install the three screws to secure the left EIA bracket.
Figure 104. Installing left EIA bracket
Install the rail and latch covers
Note: For tower server installation, the edges on the rails or the friction caused by the installation might
scratch or damage the chassis coating. Applying rail and latch covers can help reduce scratching when
installing the server into a rack.
.
Chapter 4
Server hardware setup
147
Advertisement
Table of Contents
