Table of Contents
Advertisement
Figure 95. Front door installation
a.
Align the two hooks on the front door with the corresponding holes in the front bezel; then,
move the front door inward and then pull it slightly downward until it is secured in place by the
hooks.
b.
Close the front door.
c.
Lock the server cover.
Install the server cover
Use this information to install the server cover.
About this task
S014
CAUTION:
Hazardous voltage, current, and energy levels might be present. Only a qualified service technician is
authorized to remove the covers where the label is attached.
S017
CAUTION:
Hazardous moving fan blades nearby. Keep fingers and other body parts away.
S033
.
Chapter 4
Server hardware setup
141
Advertisement
Table of Contents
