If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Install the front VGA assembly
Use this procedure to install the front VGA assembly.
Before installing the front VGA assembly:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
To install the front VGA assembly, complete the following steps:
Step 1.
Remove the fan cage assembly (see
Step 2.
Route the cable into the slot.
Figure 57. Front VGA assembly installation
Step 3.
Align the front VGA assembly with the alignment pin, and push it slightly toward the rear of the
server to it to the server.
Figure 58. Front VGA assembly installation
55).
"Remove the fan cage assembly" on page
"Safety" on page iii
and
.
Chapter 3
Hardware replacement procedures
"Installation
65).
73