Table of Contents
Advertisement
Before installing the CMOS battery:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
To install the CMOS battery, complete the following steps:
Step 1.
Follow any special handling and installation instructions that come with the replacement battery.
Step 2.
Face the positive (+) symbol to the center of the server; then, place the battery into the seat until it
clicks in place.
Figure 48. CMOS battery installation
After installing the CMOS battery, complete the following steps:
1. Reinstall the system board air baffle (see
on page
128) or processor and memory expansion tray and expansion tray air baffle (see
processor and memory expansion tray" on page
2. Reinstall the top cover (see
3. Reconnect the power cords and any cables that you removed.
4. Install the server in the rack.
5. Power on the server and any peripheral devices.
Demo video
Watch the procedure on YouTube
Fan and fan cage replacement
Use this procedure to remove or install fan and fan cage assembly.
Remove the fan cage assembly
Use this procedure to remove the fan cage assembly.
S002
55).
"Install the system board air baffle and the power interposer"
"Install the top cover" on page
"Safety" on page iii
122).
146).
.
Chapter 3
Hardware replacement procedures
and
"Installation
"Install the
65
Advertisement
Table of Contents
