Remove the processor and memory expansion tray
Use this procedure to remove the processor and memory expansion tray.
To remove the processor and memory expansion tray, complete the following steps:
Step 1.
Slightly pull out power supply 2.
Attention: Do not remove the processor and memory expansion tray without physically
disconnecting power supply 2.
Step 2.
Grasp the handle of the processor and memory expansion tray; then, pull and rotate it all the way
up until it is in the vertical position. This disengages the expansion tray from the system board.
Figure 52. Processor and memory expansion tray removal
Step 3.
Loosen the two screws that secure the expansion tray to the chassis.
Step 4.
Grasp the handle and slowly lift the expansion tray from the server; then, set it on a flat surface.
Remove the fan cage assembly
Follow the instructions in this section to remove the fan cage assembly.
S002
ThinkSystem SR850 Setup Guide
90