Profile View Terrain - Garmin G1000 Pilot's Manual

Integrated flight deck for diamond da42ng
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

6.7 PROFILE VIEW TERRAIN

Do not use Profile View Terrain data for primary terrain avoidance. Profile View Terrain is intended
WARNING:
only to enhance situational awareness.
Terrain data is not displayed when the aircraft is outside of the installed terrain database coverage
NOTE:
area.
The G1000 offers a Profile View of terrain and obstacles relative to the aircraft' s current flight path and altitude
on the Navigation Map Page of the MFD. Profile View does not provide terrain or obstacle caution or warning
annunciations or voice alerts, nor does it display potential impact points inside the Profile View. The colors and
symbols in Figure 6-162 and Table 6-22 are used to represent terrain and obstacles.
1000 ft
Unlighted Obstacle
< 1000' AGL > 1000' AGL < 1000' AGL > 1000' AGL
Accessing Profile View:
1) Select the Navigation Map Page.
2) Press the MAP Softkey.
3) Press the PROFILE Softkey to enable or disable Profile View.
190-00962-04 Rev. A
Aircraft Altitude
1
00 ft Threshold
Figure 6-162 Terrain Altitude/Color Correlation for Profile View Terrain
Lighted Obstacle
Table 6-22 Profile View Terrain/Obstacle Colors and Symbology
Garmin G1000 Pilot's Guide for the Diamond DA42NG
Terrain Above Aircraft Altitude
Yellow terrain is between 100 ft and 1000 ft below the aircraft altitude
Black terrain is more than 1000 ft below the aircraft altitude
Obstacle Location
Red obstacle is above or within 100 ft
below the aircraft altitude
Yellow obstacle is between 100 ft and
1000 ft below the aircraft altitude
Gray obstacle is more than 1000 ft
below aircraft altitude
HAZARD AVOIDANCE
Red terrain is above
or within 100 ft below
the aircraft altitude
411

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents