Abnormal Operation; Svt Troubleshooting; Reversionary Mode - Garmin G1000 Pilot's Manual

Integrated flight deck for diamond da42ng

Hide thumbs Also See for G1000:

Table of Contents

8.14 ABNORMAL OPERATION

SVT is intended to be used with traditional attitude, heading, obstacle, terrain, and traffic inputs. SVT is

disabled when valid attitude or heading data is not available for the display. In case of invalid SVT data, the

PFD display reverts to the standard blue-over-brown attitude display.

SVT becomes disabled without the following data resources:

• Attitude data

• Heading data

• GPS position data

• 9 Arc-second Terrain data

• Obstacle data

• Terrain function is not available, in test mode, or failed

• The position of the aircraft exceeds the range of the terrain database.

SVT can be displayed on the Multifunction Display (MFD) in Reversionary Mode. If it is enabled when switching

to Reversionary Mode, SVT will take up to 30 seconds to be displayed. The standard, non-SVT PFD display will

be shown in the interim.

190-00962-04 Rev. A

Figure 8-121 SVT Reversionary Mode

Garmin G1000 Pilot's Guide for the Diamond DA42NG

ADDITIONAL FEATURES

Show Quick Links

Table of Contents