Garmin G1000 Pilot's Manual page 599

OUTGOING CALLS
Voice calls can be made from the cockpit to an external phone through the Iridium Satellite Network.
The Push-to-Talk switch is not utilized for telephone communication. The microphone is active after
NOTE:
selecting the ANSWER Softkey, and stays active until the call is terminated.
To make a call:
1) Press the TEL Key on the audio panel.
2) Press the DIAL Softkey on the MFD. A display similar to Figure 8‑84 will be shown.
Or :
While viewing the AUX‑TELEPHONE Page:
a) Press the TEL Key on the audio panel.
b) Press the MENU Key to display the Page Menu.
c) Turn either FMS Knob to place the cursor on 'Dial a Phone Call'.
d) Press the ENT Key.
190-00962-04 Rev. A
Figure 8-84 Initiating a Call
Garmin G1000 Pilot's Guide for the Diamond DA42NG
ADDITIONAL FEATURES
583