Garmin G1000 Pilot's Manual page 382

HAZARD AVOIDANCE
If the continental United States version of the NEXRAD weather product is shown (US Softkey enabled),
the coverage boundary is not shown on the map.
This data is composed of the maximum reflectivity from the individual radar sweeps. The display of the
information is color-coded to indicate the weather severity level. All weather product legends can be viewed
on the Weather Data Link (FIS-B) Page. For the NEXRAD legend (Figure 6-105), press the LEGEND Softkey
when the NEXRAD weather product is enabled.
The display of no radar coverage is enabled when NEXRAD is selected for display. Areas where radar data
is not currently available, has not yet been received, or is not being collected are indicated in gray shade of
purple.
366
Figure 6-104 Regional NEXRAD on the Weather Data Link (FIS-B) Page)
Figure 6-105 NEXRAD Weather Product Legend
Garmin G1000 Pilot's Guide for the Diamond DA42NG
No Radar
Coverage
Boundary of
FIS-B Regional
NEXRAD
Product
No Radar Coverage
(Inside Coverage
Boundary)
Boundary of Regional
Radar Coverage Area
190-00-00962-04 Rev. A