System Settings - Garmin G1000 Pilot's Manual

SYSTEM OVERVIEW

SYSTEM SETTINGS

G1000 system settings are managed from the System Setup Page. The following settings can be changed:
• Date/time
• Display Units
(see Flight Instruments Section)
• Baro Transition Alert (see Flight Instruments
Section)
• Airspace alerts (see Flight Management Section)
• Arrival alerts (see Flight Management Section)
• Audio Alerts
Restoring system setup defaults:
1) Use the FMS Knob to select the AUX - System Setup Page.
2) Press the DFLTS Softkey.
Or :
a) Press the MENU Key.
b) Highlight 'Restore Defaults' and press the ENT Key.
34
Figure 1-29 AUX - System Setup Page
Garmin G1000 Pilot's Guide for the Diamond DA42NG
• MFD Data Bar Fields
(see Flight Management Section)
• CDI scaling for GPS navigation source
(see Flight Instruments Section)
• COM channel spacing
(see Audio Panel and CNS Section)
• Criteria for displaying nearest airports
(see Flight Management Section)
190-00962-04 Rev. A