Tas Alerts - Garmin G1000 Pilot's Manual

Integrated flight deck for diamond da42ng
Hide thumbs Also See for G1000:
Table of Contents

Advertisement

TAS ALERTS

Refer to the TAS600 documentation for information on alerts generated by the TAS equipment.
NOTE:
When the number of TAs on the Traffic Map Page increases from one scan to the next, the following occur:
• A "Traffic" voice alert is generated followed by the clock position, relative altitude and range of the TA.
• A TRAFFIC Annunciation appears at the top right of the airspeed on the PFD, flashing for 5 seconds and
remaining displayed until no TAs are detected in the area.
• The PFD Inset Map is automatically displayed with TA traffic.
Inset Map
Displays When
TA is Detected
TAS VOICE ALERTS
To listen to an update of Traffic Advisories select the MUTE Softkey twice.
Muting the TAS voice alert in progress:
1) Select the Traffic Map Page.
2) Select the MUTE Softkey while the voice alert is playing. Subsequent voice alerts will be heard.
190-00962-04 Rev. A
Figure 6-191 Traffic Annunciation (PFD)
Garmin G1000 Pilot's Guide for the Diamond DA42NG
HAZARD AVOIDANCE
437

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents