Garmin G1000 Pilot's Manual page 634

ADDITIONAL FEATURES
10) The selected network can be saved to system memory to make reconnection easier at a later time.
Connecting the selected network without saving:
a) Turn the large FMS Knob to move the cursor to highlight 'CONNECT'.
b) Press the ENT Key.
Saving and connect the selected network:
a) Press the ENT Key. A checkmark is placed in the checkbox and the cursor moves to the airport field as shown
in Figure 8‑118.
b) Using the FMS Knobs, enter an airport identifier to be associated with the saved network. This aids in identifying
the network later in the event of duplicate network names.
c) Press the ENT Key. The cursor moves to 'CONNECT'.
d) Press the ENT Key again to connect to the selected network.
618
Figure 8-118 Save Connection
Garmin G1000 Pilot's Guide for the Diamond DA42NG 190-00962-04 Rev. A