Garmin G1000 Pilot's Manual page 228

FLIGHT MANAGEMENT
APPROACH (APPR)
An Approach Procedure (APPR) can be loaded at any airport that has an approach available. Only one
approach can be loaded at a time in a flight plan. The route for a selected approach is defined by designating
transition waypoints.
Selected
Approach
Preview of
Selected
Approach
Loading an approach procedure into a stored flight plan:
1) Select a stored flight plan from the Flight Plan Catalog Page.
2) Press the EDIT Softkey; or press the MENU Key, select 'Edit Flight Plan', and press the ENT Key. The Stored
Flight Plan Page is displayed.
3) Press the LD APR Softkey; or press the MENU Key, select "Load Approach", and press the ENT Key. The
Approach Loading Page is displayed.
4) Select the airport and approach:
a) Use the FMS Knob to select an airport and press the ENT Key.
b) Select an approach from the list and press the ENT Key.
Or :
a) If necessary, push the FMS Knob to exit the approach list, and use the large FMS Knob to move the cursor
to the APPROACH CHANNEL field.
b) Use the FMS Knob to enter the approach channel number, and press the ENT Key to accept the approach
channel number. The airport and approach are selected.
5) Select a transition for the selected approach. Press the ENT Key.
6) Press the ENT Key to load the selected approach procedure.
212
Figure 5-79 Approach Loading Page - Selecting the Approach
Garmin G1000 Pilot's Guide for the Diamond DA42NG
Destination Airport
Approaches Available at
KCOS
Barometric Minimum
Approach Waypoint
Sequence
190-00962-04 Rev. A