Garmin G1000 Pilot's Manual page 635

ADDITIONAL FEATURES
Editing a saved network:
1) While viewing list of saved networks, press the FMS Knob to activate the cursor as seen in Figure 8‑119.
2) Turn either FMS Knob to highlight the network to be edited.
3) Pressing the ENT Key at this point will check or uncheck the AUTO CONNECT checkbox. When a checkmark is
present, the system will automatically connect to the network when within range.
Figure 8-119 Select Network to be Edited
4) Select the EDIT Softkey. The cursor now appears in the CONNECTION SETTINGS window as shown in Figure 8‑120.
190-00962-04 Rev. A Garmin G1000 Pilot's Guide for the Diamond DA42NG 619