Secure Digital (Sd) Cards - Garmin G1000 Pilot's Manual

SYSTEM OVERVIEW

1.2 SECURE DIGITAL (SD) CARDS

Ensure the G1000 System is powered off before inserting an SD card.
NOTE:
Refer to the Appendix for instructions on updating databases.
NOTE:
The PFD and MFD data card slots use Secure Digital (SD) cards and are located on the upper right side of the
display bezels. Each display bezel is equipped with two SD card slots. SD cards are used for aviation database
and system software updates as well as terrain database storage.
Ins talling an SD card:
1) Insert the SD card in the SD card slot, pushing the card in until the spring latch engages. The front of the card
should remain flush with the face of the display bezel.
2) To eject the card, gently press on the SD card to release the spring latch.
6
SD Card Slots
Figure 1-3 Display Bezel SD Card Slots
Garmin G1000 Pilot's Guide for the Diamond DA42NG 190-00962-04 Rev. A