Garmin G1000 Pilot's Manual page 283

d) Verify the displayed leg is the desired leg and press the ENT Key. Note in Figure 5-127, the magenta arrow
in the flight plan window and magenta line on the map indicating V4 is now the active flight plan leg. Note
the phase of flight remained in Terminal (TERM) mode up to this point because a departure leg was active.
Since a leg after the departure is now active, the current CDI flight phase is ENR (Enroute) and CDI scaling
has changed to 2.0 nm.
6) The aircraft continues on heading 290º. When crosstrack distance is less than 2.0 nm, the XTK disappears from
the HSI and the CDI is positioned on the last dot indicating a 2.0 nm distance from the centerline of the next
course.
190-00962-04 Rev. A
Figure 5-127 V4 Now Active Leg
Garmin G1000 Pilot's Guide for the Diamond DA42NG
FLIGHT MANAGEMENT
267