Transponder Mode Selection - Garmin G1000 Pilot's Manual

0

TRANSPONDER MODE SELECTION

Mode selection can be automatic (Altitude Modes) or manual (Standby, ON, and Altitude Modes). The STBY,
ON , and ALT Softkeys can be accessed by pressing the XPDR Softkey.
Selecting a transponder mode:
1) Press the XPDR Softkey to display the Transponder Mode Selection Softkeys.
2) Press the desired softkey to activate the transponder mode.
STANDBY MODE (MANUAL)
In Standby Mode, the IDENT function is inoperative.
NOTE:
Standby Mode can be selected at any time by pressing the STBY Softkey. In Standby, the transponder
is powered and new codes can be entered, but no replies or squitters are transmitted.. When Standby is
selected, a white STBY indication and transponder code appear in the mode field of the Transponder Data
Box.
190-00962-04 Rev A
STBY ON ALT
1 2 3 4
Figure 4-35 Transponder Softkeys (PFD)
Figure 4-36 Standby Mode
Garmin G1000 Pilot's Guide for the Diamond DA42NG
XPDR
IDENT
VFR CODE IDENT
Pressing the BACK Softkey
returns to the top-level softkeys.
5 6 7 IDENT
Pressing the BACK Softkey returns to the mode selection softkeys.
STBY Mode (White
Code Number and
Mode)
AUDIO PANEL AND CNS
(Optional)
ADS-B TX BACK ALERTS
BKSP BACK ALERTS
119