Garmin G1000 Pilot's Manual page 363

1) Select the Weather Information Page.
a) Turn the large FMS Knob to select the Waypoint Page Group.
b) Press the WX Softkey to select the Weather Information Page.
2) Press the FMS Knob to display the cursor.
3) Use the FMS Knob to enter the desired airport and press the ENT Key.
4) Use the FMS Knob or the ENT Key to scroll through the METAR and TAF text. Note that the METAR text must
be completely scrolled through before scrolling through the TAF text.
METAR Symbol
Original METAR text is also accessible while panning the map cursor over a METAR flag on any map page
on which a METAR is displayed. The METAR text is shown in a box near the METAR flag.
In addition, METAR flags and their associated text are displayed on the Active Flight Plan Page on the MFD.
METAR flags appears next to waypoints in the flight plan with an associated METAR.
Displaying original METAR text on the Active Flight Plan Page:
1) Select the Active Flight Plan Page on the MFD.
2) Press the FMS Knob to activate the cursor.
3) Turn the large FMS Knob to highlight a waypoint with an associated METAR. The METAR text will appear in the
'SELECTED WAYPOINT WEATHER' window below.
4) When finished, press the FMS Knob to remove the cursor or press the FPL Key to exit the Active Flight Plan
Page.
To display the METAR legend on the Weather Data Link (CNXT) Page, press the LEGEND Softkey when
METARs are selected for display.
190-00962-04 Rev. A
Figure 6-79 METAR and TAF Text on the Weather Information Page
Garmin G1000 Pilot's Guide for the Diamond DA42NG
HAZARD AVOIDANCE
METAR Text for the
Selected Airport
TAF Text for the
Selected Airport
347