FLIGHT MANAGEMENT
l)
V4 is now loaded into the flight plan as shown in Figure 5-125.
5) Making V4 the active leg of the flight plan.
a) Press the FMS Knob to activate the cursor.
b) Turn the large FMS Knob to highlight SLN. The TO waypoint of the leg is selected in order to activate the
leg.
c) Press the ACT LEG Softkey. The confirmation window is now displayed as in Figure 5-126. Note the TOP
to SLN leg is actually part of V4.
266
Figure 5-125 V4 is Loaded in the Flight Plan
Figure 5-126 Comfirm Active Leg
Garmin G1000 Pilot's Guide for the Diamond DA42NG
190-00962-04 Rev. A