Table of Contents
Advertisement
B.
Connect the hydraulic hose marked
with a red identifier to the outboard
quick-disconnect coupler (marked with a red
identifier); refer to
the Mower Deck (page
C.
Repeat steps
hoses at the other side of the mower deck.
Removing the Belt Cover
Note:
You must separate the U-joint of the driveshaft
from the mower-deck gearbox before removing the
belt cover; refer to
Disconnecting the Driveshaft from
the Mower-Deck Gearbox (page
1.
Rotate the 3 quarter-turn fasteners
counterclockwise
Figure 116
1. Quarter-turn fasteners
2.
Loosen the bolt
(Figure
3.
Remove the belt cover from the mower deck.
Installing the Belt Cover
1.
Align the quarter-turn fasteners of the belt cover
with the clip nuts of the mower deck; refer to
Figure 116
in
Removing the Belt Cover (page
77).
2.
Rotate the quarter-turn fasteners clockwise.
3.
Install the bolt in the belt cover to the nut clip of
the mower deck; refer to
the Belt Cover (page
Figure 114
in
Removing
75).
A
and
B
for the hydraulic
75).
(Figure
116).
2. Bolt
116).
Figure 116
in
Removing
77).
Removing the Pulley Cover
1.
Remove the belt cover; refer to
Belt Cover (page
2.
Remove the bolt and washer that secure the
pulley cover to the mower deck
1. Bolt
2. Washer
3.
Remove the pulley cover from the machine.
Installing the Pulley Cover
1.
Align the pulley cover over the right-most pulley;
refer to
Figure 117
(page
77).
2.
Secure the pulley cover to the clip nut of the
deck with the bolt and washer that you remove in
g231881
step
2
in
Removing the Pulley Cover (page
Changing the Oil in the
Mower-Deck Gearbox
Service Interval: After the first 50 hours—Change
Every 300 hours—Change the oil in the
mower-deck gearbox.
Gearbox oil specification: PG2 and API GL4, GL5,
or MT1
Gearbox oil viscosity: LSX 75W90
Gearbox oil capacity: 112 ml (3.8 oz)
Preparing to Change the Gearbox
Oil
1.
Park the machine on a level surface, disengage
the PTO, and lower the mower deck.
2.
Engage the parking brake, shut off the engine,
and remove the key.
3.
Remove the belt cover; refer to
Belt Cover (page 77)
77
Removing the
77).
(Figure
Figure 117
3. Pulley cover
in
Removing the Pulley Cover
the oil in the mower-deck gearbox.
Removing the
117).
g231912
77).
Advertisement
Table of Contents
