Table of Contents
Advertisement
Position ......................................................... 71
Servicing the Blades ......................................... 72
Mower-Deck Gearbox ................................... 75
Mower-Deck Gearbox ................................... 75
Removing the Mower Deck............................... 75
Installing the Mower Deck................................. 76
Removing the Belt Cover .................................. 77
Installing the Belt Cover .................................... 77
Removing the Pulley Cover .............................. 77
Installing the Pulley Cover ................................ 77
Gearbox ........................................................ 77
Leveling the Mower Deck.................................. 79
Checking the Mower Deck Belt Tension ............ 82
Replacing the Mower Deck Belt ........................ 82
Switching the Skids .......................................... 83
Maintaining the Hopper ........................................ 84
Aligning the Hopper to the Chute Seal............... 84
Cleaning .............................................................. 85
Cover ............................................................ 85
Cleaning Under the Mower Deck ...................... 85
Cleaning the Hopper Screen............................. 85
Door .............................................................. 86
Disposing of Waste........................................... 86
Storage ................................................................... 87
Storage Safety.................................................. 87
Storing the Battery ............................................ 87
Preparing the Machine...................................... 87
Preparing the Engine ........................................ 87
Troubleshooting ...................................................... 88
Safety
This machine has been designed in accordance with
ANSI B71.4-2017 (when you complete the setup
procedures) and EN ISO 5395.
General Safety
This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Use your full attention while operating the
machine. Do not engage in any activity that
causes distractions; otherwise, injury or property
damage may occur.
•
Do not operate the machine without all guards
and other safety protective devices in place and
functioning properly on the machine.
•
Keep your hands and feet away from rotating
parts. Keep clear of the discharge opening.
•
Keep bystanders and children out of the operating
area. Never allow children to operate the machine.
•
Shut off the engine, remove the key, and wait
for all movement to stop before you leave the
operator's position, Allow the machine to cool
before adjusting, servicing, cleaning, or storing it.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always
pay attention to the safety-alert symbol
means Caution, Warning, or Danger-personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
4
, which
Advertisement
Table of Contents
