Lubrication; Greasing The Mower Deck - Toro 31051 Operator's Manual

Lubrication

Greasing the Mower Deck

Service Interval: Every 50 hours—Grease the mower deck. When operating the machine in extremely dusty
and dirty conditions, lubricate the mower deck daily.
Grease specification: No. 2 lithium grease
Important:
Dusty and dirty operating conditions could cause dirt to get into the bearings and bushings,
resulting in accelerated wear.
Note:
Lubricate the grease fittings immediately after every washing, regardless of interval specified.
1. Remove the belt cover; refer to
2. Wipe grease fitting clean so debris is not forced into the bearing or bushing.
3. Pump grease into the bearing or bushing.
4. Wipe off excess grease.
5. Install the belt cover; refer to
Removing the Belt Cover (page
Installing the Belt Cover (page
Figure 42
43
77).
77).
g224587