Table of Contents
Advertisement
Shutting Off the Engine
CAUTION
To prevent personal injury, shut the engine off
and wait for all moving parts to stop before
checking for oil leaks, loose parts, or other
malfunctions.
1.
Move the throttle control rearward to the S
position.
2.
Move the PTO switch to the O
3.
Rotate key switch to the O
key from the switch to prevent accidental
starting.
Note:
If the engine stops running and the key switch
is in the L
O
or the O
IGHTS
N
you leave the operator's seat, after a short delay a
buzzer will sound to alert you to turn the key to the
O
position.
FF
Engaging the Parking Brake
1.
Push the brake pedal down.
2.
Push the parking-brake lock down and remove
your foot from the brake pedal to engage the
parking brake.
Disengaging the Parking
Brake
Push the brake pedal down to disengage the parking
brake.
Operating the Hopper
Operating the Hopper Safety
•
When dumping, do not let anyone stand behind
the machine.
•
Ensure that there is enough clearance above
when raising the hopper; otherwise, you could
damage the machine.
•
Use extra caution when operating the machine on
wet surfaces, on slopes, at higher speeds, or with
a full load. Stopping time increases with a full load.
•
Keep all bystanders away. Before backing up, look
to the rear and ensure that no one is behind the
machine. Back up slowly.
•
Use extra caution and avoid moving the machine
with the hopper in the raised position.
•
Keep bystanders away from the machine when
lowering the hopper.
LOW
position.
FF
position. Remove
FF
/P
position, and
N
REHEAT
Raising the Hopper
1.
Park the machine on a level surface.
2.
Pull the lock collar on the hopper lift lever up
and move the lever rearward to raise the hopper
(Figure
23).
30
Figure 23
g215377
Advertisement
Table of Contents
