Table of Contents
Advertisement
Figure 111
1. Wing blade assembly
2. Spring lock washer
3. Disc bolt
4. Blade assembly retainer
3.
Torque the disc bolt to 53 N∙m (39 ft-lb).
4.
Torque the blade bolts to 50 N∙m (37 ft-lb).
Disconnecting the
Driveshaft from the
Mower-Deck Gearbox
1.
Rotate the quarter-turn fastener and open the
universal-joint cover from the belt cover
112).
Figure 112
1. U-joint cover
2. Quarter-turn fastener
3. Mower-deck gearbox
2.
Disconnect the forward end of the driveshaft
from the mower-deck gearbox by pressing the
spring-loaded pin, and then pulling the end of
the driveshaft rearward
g224559
5. Curved washer
6. Spindle shaft
7. Blade bolts
(Figure
g231879
4. Universal joint (driveshaft)
5. Spring-loaded pin
(Figure
112).
Connecting the Driveshaft
to the Mower-Deck Gearbox
1.
Align the splines of the driveshaft-universal joint
with the splines in the gearbox coupling; refer to
Figure 112
in
Disconnecting the Driveshaft from
the Mower-Deck Gearbox (page
2.
Press the spring-loaded pin and then push the
end of the driveshaft forward; refer to
112
in
Disconnecting the Driveshaft from the
Mower-Deck Gearbox (page
3.
Release the spring-loaded pin and check that
the universal joint of the driveshaft is locked
into the mower-deck gearbox; refer to
112
in
Disconnecting the Driveshaft from the
Mower-Deck Gearbox (page
4.
Close the universal-joint cover and secure it to
the belt cover with the quarter-turn fastener; refer
to
Figure 112
from the Mower-Deck Gearbox (page
Removing the Mower Deck
1.
Park the machine on a level surface.
2.
Disengage the PTO and engage the parking
brake.
3.
Before lowering the deck, pull and rotate the
rear link pins at both sides of the mower deck
(Figure
113).
1. Rear link pins
4.
Disconnect the hydraulic hoses from each side
of the traction unit
75
75).
75).
75).
in
Disconnecting the Driveshaft
Figure 113
(Figure
114).
Figure
Figure
75).
g231878
Advertisement
Table of Contents
