Servicing The Wiring Harness - Toro 31051 Operator's Manual

Light Fuses—Figure 80
Circuit
Right steady light and plate
light
Left steady light
Full-beam light
Headlight
Warning device
Indicator lights
Rotating beacon light
Hazard-light switch
Figure 80
1. Right steady light and
plate light fuse (3 A)
2. Left steady light fuse (3 A)
3. Full-beam light fuse (15 A) 7. Rotating beacon light fuse
4. Headlight fuse (10 A)
There are also 2 fuses (40 A) that protect the main
machine wire harness
Figure 81
1. Fuses (40 A)
Fuse Type
3 A
3 A
15 A
10 A
10 A
7.5 A
5 A
15 A
5. Warning device fuse (10
A)
6. Indicator lights fuse (7.5 A)
(5 A)
8. Hazard-light switch fuse
(15 A)
(Figure 81).
Servicing the Wiring
Harness
Prevent corrosion of wiring terminals by applying
Grafo 112X (Skin-over) grease, Toro Part No. 505-47,
to the inside of all harness connectors whenever you
replace the harness.
Important:
Whenever working with the electrical
system, always disconnect the battery cables,
negative (-) cable first, to prevent wiring damage
from short-outs.
g224646
g224476
60