Table of Contents
Advertisement
Lubrication
Lubricating the Grease
Fittings
Service Interval: Yearly
Note:
See the chart for the service intervals.
1.
Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Lubricate fittings with NLGI grade #2
multi-purpose gun grease.
Refer to the following chart for fitting locations
and lubrication schedule.
Lubrication Chart
Fitting
Initial
Locations
Pumps
1. Deck Belt
1
Idler Pivot
Number of
Service
Places
Interval
1
Yearly
Engine Maintenance
Important:
Refer to the engine owner's manual
for additional maintenance procedures.
WARNING
The engine can become very hot, especially
the muffler and exhaust components.
Touching a hot engine can cause severe
burns.
Allow the engine to cool completely before
service or making repairs around the engine
area.
Engine Safety
•
Shut off the engine before checking the oil or
adding oil to the crankcase.
•
Keep your hands, feet, face, clothing, and other
body parts away from the muffler and other hot
surfaces.
•
Do not change the engine governor setting or
overspeed the engine.
Servicing the Air Cleaner
Service Interval: Every 25 hours—Service the foam
element. (May need more often
under severe conditions. See
the Engine Owner's manual for
additional information.)
Every 100 hours—Service the paper element.
(May need more often under severe conditions.
See the Engine Owner's manual for additional
information.)
Every 200 hours/Yearly (whichever comes
first)—Replace the paper element.
1.
Park the machine on a level surface, disengage
the PTO, and engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
See the engine owner's manual for maintenance
instructions.
26
Advertisement
Table of Contents
