Ipp Client Setup - Windows 2000/Xp - SMC Networks EZ Networking SMC2621W-P User Manual

Chapter 7 Special Features
•
To create additional IPP Ports, repeat the entire procedure.
•
The Proxy Server and other options are set individually
for each IPP Port.
Changing the IPP Port Settings
After the IPP port is created, you can reach the screen shown
in Figure 34 [IPP Port] using the Windows [Port Settings] button:
1. Open the [Printers] folder ([Start – Settings – Printers])
2. Right-click the IPP Printer, and select [Properties].
3. Locate and click the [Port Settings] button ([Details] or [Port]
tab, depending on your version of Windows).
There are 2 settings: [Retry Interval] and [Retry Count] which can
be adjusted if you have problems connecting to the IPP Server.
•
[Retry Interval] sets the time interval (in seconds) between
connection attempts. Increase this number if you have a poor
connection, or the remote server is very busy.
•
[Retry Count] sets how many connection attempts will be
made. Increase this number if you have a poor connection,
or the remote server is very busy.
IPP Client Setup – Windows 2000/XP
Windows 2000 has its own IPP Client, and there is no need to
install the supplied IPP Client Software. To use Windows 2000's
IPP Client with the Wireless Print Server, follow this procedure:
82