Menus - SMC Networks EZ Networking SMC2621W-P User Manual

Menus

[Main] Menu
[Device Status]
[Printer Status]
[Configure]
[Upgrade]
[Refresh]
[Exit]
[InitDevice] Menu
[Reset Device]
[Restore
to Factory
Default]
[Attached
Remote]
[Connected
Protocol]
Diagnostics menu
[Print Test Page]
Same as [Device] Icon.
Same as [Printer Status] Icon.
Same as [Configure] Icon.
Same as [Upgrade] Icon.
Same as [Refresh] Icon.
Same as [Exit] Icon.
This will cause the device to reboot. This
should be done after making any configuration
changes, or if the device stops responding
after some problems.
This will restore ALL device values to their
factory defaults. To restore only the current
screen, use the [Set to Default] button on
the screen.
This is used to connect to a Wireless Print
Server device on another LAN segment.
You need to know the IP address of the
remote Wireless Print Server. If your LAN
does not have a Router, you can ignore this
option.
This option allows you to designate which
LAN protocol will be used for communication
between the selected device and this
application.
You should select ONE protocol only.
Use this option to print a test sheet from the
selected Wireless Print Server port. The test
print out will include status information.
Operation
47