Lpd On Bsd - SMC Networks EZ Networking SMC2621W-P User Manual

LPD on BSD

Before continuing, ensure that an IP Address has been assigned
to the Wireless Print Server. Remember the following:
The remote host name is the name of the Wireless Print Server.
The remote printer name is the logical printer (e.g. L1) on the
Wireless Print Server.
If asked for the LPD type, enter the service type as BSD.
In the sample commands shown, printer_name is the Print
Queue serviced by the logical printer on the Wireless Print
Server, and Spooler_dir is the name of the directory, which
is used to spool the print jobs.
Procedure
Create a spooling directory
Set spooling daemon as owner
of this directory
Create read/write permissions chmod 775 /usr/spool/Spooler_dir
Give permissions to LPD
processes
Add remote printer(s)
Start lpc print mechanism
Action
Appendix C Unix Systems
Sample Command
mkdir /usr/spool/ Spooler_dir
chown daemon /usr/spool/Spooler_dir
chgrp daemon /usr/spool/Spooler_dir
See below
lpc start printer_name
123