Lpd On System V - SMC Networks EZ Networking SMC2621W-P User Manual

Appendix C Unix Systems
6. Ensure that the logical printers are configured in the Wireless
Print Server.
7. Print using the following command:
lp -d printer_queue file_name
Where:
printer_queue is one of the entries used in Name of queue to add.
file_name is the file you wish to print.

LPD on System V

Before beginning LPD Setup, ensure that an IP Address has been
assigned to the Wireless Print Server. Keep the following points
in mind:
The remote host name is the name of the Wireless Print Server.
The remote printer name is the print queue name for the Logical
Printer. Logical printers also need to be configured on the
Wireless Print Server itself.
If your UNIX asks for the LPD type, be sure to identify the service
type as BSD. The Wireless Print Server's LPD protocol meets
BSD system standards.
In the sample commands shown, printer_name is the name
of the Print Queue serviced by the Wireless Print Server, and
Spooler_directory is the name of the directory, which is used
to spool the print jobs.
119