SMC Networks EZ Networking SMC2621W-P User Manual page 55

Wireless print server
Hide thumbs Also See for EZ Networking SMC2621W-P:
Table of Contents

Advertisement

Chapter 5 BiAdmin Management Utility
Some Wireless Print Server models also support the Auto-IP
function. If the Wireless Print Server is set to [Dynamic IP Address],
but there's no DHCP server found on the network, the Wireless
Print Server will get an IP from the range of 169.254.1.1 ~
169.254.254.254 automatically. In this case, even though the
Wireless Print Server was initialized with an Auto-IP, it will change
to DHCP whenever a DHCP server is detected.
The [TCP session] parameters should only be changed if advised
to do so by your Network Administrator or Print Server Technical
Support.
50
Figure 20. TCP/IP Screen

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents