SMC Networks EZ Networking SMC2621W-P User Manual page 33

Chapter 4 Client PC Configuration
5. Installation is now complete. You can now print using this
printer.
•
To install additional Printers, repeat steps 4.
•
Use the [Start] menu to run this program in future. The default
installation is [Start Programs – PrintServer Driver – Print
Driver Setup].
Note:
1. Run the Epson Spooler Manager.
2. Select [Queue Setup] from the menu.
3. Click [Use Print Manager for this port].
4. Click [OK] to exit.
Management
•
Print jobs can be managed like any Windows printer. Open the
[Printers] folder [Start – Settings – Printers] and double-click
any printer to see the current print jobs.
•
If the printer attached to the Wireless Print Server is changed,
just run this program again, and select the correct printer.
•
To delete a port created by this setup program, use the
Windows [Delete Port] facility:
•
•
•
If the Wireless Print Server's IP Address is changed, and you
can no longer print, delete the port (see procedure above) and
re-install it.
28
If using the Epson Spooler Manager, this program
must be disabled, as follows:
Right-click any printer in the [Printers] folder, and select
[Properties].
Locate the [Delete] Port button. This button is on the
[Details] or [Ports] tab, depending on your version
or Windows.