SMC Networks EZ Networking SMC2621W-P User Manual page 76

Chapter 6 Web-Based Management
Configuration
Regulatory
Domain:
Station name: This is the same as the Device (Host) Name on the WAN
SSID
(ESSID)
Channel No.
Network
Type:
Link Info
WEP Data Privacy
Off-no data
encryption
72
It is illegal to use this device in any location outside of
the regulatory domain.
screen. On your PC, some Wireless status screens may
display this name as the Access Point in use.
To communicate, all Wireless stations MUST use the
same SSID/ESSID. The default value is null.
Note: The SSID is case sensitive.
Select the value you wish to use on your Wireless LAN.
If you experience lost connections and/or slow data
transfers you may need to experiment with different
channels to see which is the best.
Select the correct value for your Wireless LAN.
•
802.11 Ad-Hoc mode is used when there is no
Wireless Access Point, and each Wireless station
communicates directly with other Wireless stations.
This is the current standard.
•
Ad-Hoc mode is used when there is no Wireless
Access Point, and each Wireless station
communicates directly with other Wireless
stations. This is the older standard.
•
Infrastructure mode is used when each Wireless
station connects to the Wireless Access point.
This also provides access to the wired LAN.
Click this button to open the sub screen.
If Off (default), data is NOT encrypted before being
transmitted.