SMC Networks EZ Networking SMC2621W-P User Manual page 59

Chapter 5 BiAdmin Management Utility
Port Tab
This screen has 2 panels: [Physical Port] and [Logical Port].
Physical Port
The following settings are available:
•
[Selected Physical Port]
Select the Physical Printer Port you wish to configure.
•
[Handshake Signal]
Select Busy Only or Busy & Ack for the Physical Port.
•
[Printer Type]
Select High Speed or Low Speed for the Printer Type.
Logical Port
Logical Ports (printers) can be used in the Unix environment.
The following settings are available:
•
[Selected Logical Port]
Select the Logical Printer Port you wish to configure.
•
[Map to Physical Port]
Select the physical Printer Port which the Logical printer
will use.
•
[Convert LF to LF+CR]
If checked, LF (line feed) characters are changed to CR+LF
(carriage return + line feed).
•
[Prefix of Job]
The printer control string (in hex) to be sent to the printer
before each print job. This string cannot exceed
15 characters.
•
[Suffix of Job]
The printer control string (in hex) to be sent to the printer after
each print job. This string cannot exceed 15 characters.
54