SMC Networks EZ Networking SMC2621W-P User Manual page 109

Chapter 8 Troubleshooting
Problem No. 6 The [Configuration] button on the [Printer Status]
Solution No. 6
Problem No. 7 When I send a print job, cannot print or prints
Solution No. 7
106
screen in BiAdmin is grayed out, even though my
printer is bi-directional.
The button is unavailable if the printer is busy.
You must wait until the printer is idle.
garbage.
The problem may be due to the printer, if the
printer you used is an old model with low speed,
the following steps may solve this problem.
Try the following:
•
Open the BiAdmin Utility.
•
Click the [Printer Status] icon.
•
Change the Printer Type setting to [Low Speed] or
set the Handshake Signal setting to [Ack & Busy].