Diagnostic Push Button - SMC Networks EZ Networking SMC2621W-P User Manual

Chapter 1 Introduction

Diagnostic Push Button

The Wireless Print Server is fitted with a Diagnostic Push Button.
The button is recessed; a pin or paper clip can be used to press
it. This button has 2 functions:
•
Restore the factory default settings.
•
Print a test page containing all current settings.
To restore the factory default settings:
1. Turn the Wireless Print Server OFF.
2. Press and hold the diagnostic button. While pressing the
button, switch the Wireless Print Server ON.
3. If you continue pressing the button for 10 seconds, a diagnostic
page will be printed, showing the new (default) settings.
To generate a Diagnostic print out
1. Ensure that both the Wireless Print Server and the printer
attached to Port 1 are ON.
2. Press the diagnostic button, and hold it in for 2 seconds.
3. The test page, containing the current settings, will be printed.
Note:
8
PostScript printers are unable to print this page. If you
have a PostScript printer on Port 1, the test page will
not be printed.