Ipp Server Configuration - SMC Networks EZ Networking SMC2621W-P User Manual

Chapter 7 Special Features

IPP Server Configuration

The Wireless Print Server contains the necessary firmware
to act as an IPP Server. No additional configuration is necessary.
However, the following requirements must be met.
•
The Wireless Print Server must have a valid IP Address.
For printing via the Internet, the Wireless Print Server's IP
Address must be external (allocated by your ISP), rather
than an IP Address on your local LAN.
•
Any Router, Gateway or Firewall linking your LAN to the
Internet must NOT block the IPP protocol.
•
You must advise clients of the correct URL or IP Address of the
IPP Server. To use a URL rather than an IP Address, you need
to register the domain name for the URL.
•
Unless clients are using Windows 2000, you must provide
your clients with the supplied IPP Client software. If it is
not convenient to provide the CD-ROM, supply the
IPP_CLIENT.EXE file, located in the IPP folder.
Note:
78
If the print server is placed behind a firewall
port 631TCP should be opened for the IPP
communication.