SMC Networks EZ Networking SMC2621W-P User Manual page 14

This chapter describes how to install the Wireless Print Server in
your Local Area Network.
Procedure
1. Preparation
•
Ensure the power is OFF. Do not connect the Wireless Print
Server while power is On.
•
Find the Default Server Name for your Wireless Print Server.
The Default Server Name is shown on a sticker on the base
of the device. It consists of 8 letters and/or digits. Record this
name; it may be needed during configuration.
2. Connect the Printer or Printers
Connect the printer or plotter cable(s) to the appropriate port(s)
on the Wireless Print Server unit. Parallel port cables should be
less than 3 meters long.
LAN I
C
HAPTER
NSTALLATION
2
9