SMC Networks EZ Networking SMC2621W-P User Manual page 108

Problem No. 3 I connected and configured a WPS (Windows
Solution No. 3
Problem No. 4 When printing from some software applications
Solution No. 4
Problem No. 5 A printing device connected to the Wireless Print
Solution No. 5
Printing System) printer as described, but
I can't get the print job to print.
Printer drivers for WPS printers poll the printer before
sending print data. Since the printer is networked, the
printer is not found and no data is sent. The solution
is to add your printer as a network printer as described
in Solution 2 above.
such as Power Point, it takes a long time and the
print out is incorrect.
The problem is due to the printer, which is being
configured to [Start printing after the first page
is spooled]. To change this setting:
•
Go to [Control Panel – Printers] and click
on your printer.
•
Then select [File – Properties – Details].
•
When the Details screen appears, click the
[Spool Settings] button.
•
When the Spool Settings dialogue box appears,
choose [Start printing after last page is spooled]
and click [OK].
Server port cannot print or prints garbage.
Check the following:
•
Cable connection between Wireless Print Server
and printer.
•
Printer driver in the application program or Windows
matches the printer.
Windows Printing Problems
105