1. Manuals
  2. Brands
  3. SMC Networks Manuals
  4. Print Server
  5. SMC EZ Connect Wireless Print Server with USB Port...
  6. User manual

SMC Networks SMC EZ Connect Wireless Print Server with USB Port SMCWPS-G User Manual

54mps wireless print server with usb port
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual

Advertisement

Table of Contents
loading

Related Manuals for SMC Networks SMC EZ Connect Wireless Print Server with USB Port SMCWPS-G

Summary of Contents for SMC Networks SMC EZ Connect Wireless Print Server with USB Port SMCWPS-G

  • Page 2: Table Of Contents

    ... 3 OPYRIGHT 1. INTRODUCTION... 4 ... 4 RODUCT VERVIEW ... 4 IRELESS PECIFICATIONS OMPONENTS AND EATURES ... 6 ARDWARE NSTALLATION ... 7 ETWORK NVIRONMENT IRED ETWORK WITH RINT IRELESS ETWORK WITH NFRASTRUCTURE CCESS (PEER- -PEER) M 2. PRINT SERVER INSTALLATION ... 9 ...
  • Page 3 IP A ... 56 SSIGNING AN DDRESS NT LPR P INDOWS RINTING 2000/XP/2003 S INDOWS TANDARD UNIX I ... 62 NSTALLATION 8. UPGRADING PRINT SERVER ... 67 ... 67 VERVIEW PGRADING THE PRINT SERVER FROM PGRADING THE PRINT SERVER FROM PGRADING THE PRINT SERVER FROM PGRADING THE PRINT SERVER FROM 9.

  • Page 4: Copyright

    Trademarks NetWare is a registered trademark of Novell Inc and Windows 95/98/Me and Windows NT/2000/XP/2003 are registered trademarks of Microsoft Corp. All other brands and product names are trademarks of their respective companies. Copyright No part of this publication may be reproduced in any form or by any means or used to make any derivative (such as translation, transformation or adaptation) without the express written consent of the manufacturer as stipulated by the United States Copyright Act of 1976.

  • Page 5: Introduction

    1. Introduction Product Overview The external print servers enhance capability by letting you place your printers at convenient locations directly on the Ethernet network, and by increasing network printer performance and management. Please note that the print server does not support printing with host-based printers, e.g.

  • Page 6: Components And Features

    Components and Features Print server ˙1 USB2.0 port ˙POST (Power On Self Test) ˙ LED Lights Power: Green, indicating Power/POST process (flash 5 times) WLAN Active: Green, indicating the linkage and data transmission via wireless connectivity. USB: Green, indicating the linkage and data transmission of USB port. ˙1 setup CD for Windows 95/98/Me/NT/2000/XP/2003 ˙1 external AC power adapter(5V/2A) ˙Normal (factory default) and Diagnostic Mode (select by DIP switch)

  • Page 7: Hardware Installation

    Hardware Installation To install the print servers, you need to complete these steps: ˙Confirm that your printer USB port works well. ˙Connect the print server to the network and printer, and plug in the print server. Follow these instructions to install the print servers, please refer to any peripheral you are connecting to the print server: 1.

  • Page 8: Network Environment

    Network Environment Wired Network with Print Server: Print Server Printer Computer Computer Computer Wireless Network with Print Server: Infrastructure (Access Point) Mode: Print Server Access Point Printer Laptop Laptop Computer Computer Computer...

  • Page 9: Ad-Hoc (Peer-To-Peer) Mode

    Ad-Hoc (PEER-to-PEER) Mode: Print Server Printer Laptop Laptop...

  • Page 10: Print Server Installation

    Print Server Installation Preparation To meet users’ network printing needs in today’s heterogeneous and multiple protocol networking environments, the print server supports industrial standard protocols, including TCP/IP, IPX/SPX, NetBEUI and AppleTalk. This means that the print server supports the most popular network operating systems today, including NetWare, Windows 95/98/Me/NT/2000/XP/2003, UNIX systems and Macintosh computer.
  • Page 11 print server, include alert and consumables Internet Printing Protocol Windows Printing via the NT/2000/XP/2003 internet to Internet Printing Protocol- enabled print server Comment Configuration solution Table has many installations way to setup Windows 95/98/Me, Windows NT/2000/XP/2003, NetWare, UNIX / Linux system and Mac computer. Firstly, we introduce PSAdmin utility, HP Web JetAdmin program and Internet Printing Protocol solution.

  • Page 12: Software Installation

    3. Software Installation The PSAdmin is a proprietary Windows-based management program that can assist you in configuring and managing your print server in NetWare environments. The program can be installed from the setup CD of print server. Installing the PSAdmin and Print Server’s Driver To enable network communication with print server, your computer must have a proper IP address, e.g.
  • Page 13 Choose Setup Wizard to install the print server and configure the connected printer. Note: The setup CD will install the print server’s driver, PSAdmin and Setup Wizard into your computer. The default installation directory will be C:\Program files\Network Print Monitor. Click Next, the wizard will automatically discover the print server.
  • Page 15 On the Change Settings screen, select No or Yes: Click No if you want the print server to keep using the default IP address and keep the default Infrastructure settings: Infrastructure mode SSID: <ANY> Channel: 6 Encryption: none DHCP client: off IP address: DHCP client Click Yes if you want change wireless settings or assign a static IP address to the print server:...
  • Page 16 Enter the proper SSID of your wireless network. Channel: optional Data Transmit Rates: select Auto or others Transmit Mode: select Auto or others On the Wireless Security screen, enable or disable WEP/WPA/WPA2 encryption, configure according to your wireless network and click Next. On the TCP/IP Settings screen, specify a fixed or dynamic IP address for the print server, a fixed IP address is highly recommended.
  • Page 17 Click Add New Printer to launch Windows Add Printer Wizard. Click Next and select Local Printer, make sure the Automatically detect and install my Plug and Play printer check box is NOT checked. Then click Next.
  • Page 18 10. Make sure the Use the following port radio-button is clicked and select LPT1: (recommended Printer Port) from the pull-down list. Then click Next. 11. Select Manufacturer and Printer from the lists of printer’s driver. Then click Next.
  • Page 19 12. If you already have the printer’s driver installed, you will be asked whether to keep it or to replace it. Click Next. Supply a name for the printer and choose whether you want to make it your default printer. Then click Next. 13.
  • Page 20 16. Right-click, select Properties -> Ports and verify that the print server’s port appears.

  • Page 21: Using Psadmin

    17. Go to General; click Print Test Page to verify the configuration. 18. Done. Note: If you want to install more print servers, start setup wizard from your Windows Start menu: start -> All Programs -> Network Print Server -> PSWizard and repeat the installation procedure.

  • Page 22: Wizard

    Wizard Wizard is a configuration program that can assist you in setting up the necessary parameters for your print server device to function. Setup a print server by using Wizard. TCP/IP Wizard Click Wizard button just like a picture Select “Obtain an IP address from DHCP server”. If there is a DHCP server on your network.
  • Page 23 (Optional) In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to use. (Optional) In the Gateway field, type the IP address of gateway. When done, click OK button. The program will save the above settings into the print server.

  • Page 24: Manual Setup

    Manual Setup Manual Setup is a configuration program designed for more experienced users of NetWare. To setup the print server by using Manual Setup follow the steps: 1. Run PCONSOLE in NetWare 3.x or NetWare 4.x and create the necessary parameters (Refer to your Novell NetWare print server/Services manual for details).
  • Page 25 Properties –TCP/IP Options The TCP/IP options allow you to modify the print server’s TCP/IP settings. Each option is detailed as follows. Obtain an IP address from a DHCP server: This option enables or disables the DHCP feature of the print server. When this option is enabled, the print server will obtain an IP address automatically from the DHCP server on your LAN.

  • Page 26: Refresh

    Upgrade Upgrade allows the user to upgrade the print server device. In order to upgrade the unit please perform the steps as follows: 1. Click Upgrade button just like a picture elect General Upgrade. Make sure that the upgrade file is located in the same directory as PSAdmin.

  • Page 27: Multiple Print Queues Configuration

    Note: Configure the print speed in the Advanced label, must match the printer’s speed which connect to the print server. Undependable configuration will cause printer to abnormal printing. Multiple Print Queues Configuration To configure the print server to service multiple print queues, please follow the instructions listed below: 1.
  • Page 28 Click Change or Remove Programs tab. Select Network Print Monitor for Windows 95/98/NT/2000/XP/2003 and click Change/Remove button. The un-installation wizard program will be launched. Follow the directions on the screen to complete the un-installation procedure.

  • Page 29: Internet Printer Connection And Hp Web Jetadmin

    4.Internet Printer Connection and HP Web JetAdmin IPP Overview Print server(s) support the Internet Printing Protocol (IPP). Using the appropriate software on your system, you can create an IPP print path from your system as Windows PC over the Internet. Note: For incoming print path requests, the network administrator have to configure the firewall to accept incoming IPP requests.
  • Page 30 6. In URL’s box, input print server’s IP address, for example, http://192.168.10.182/lp1. Then Click Next. ** One port should be the port name as lp1. 7.It will check print server to connect to HP printer, if not, it will appear as follow picture. Then Click OK.

  • Page 31: Hp Web Jetadmin Overview

    9.If you want your Windows-based programs to use this printer as the default printer, please select “Yes”, and Click Next. It will appear as follow picture 19. Click Finish button. 20. Done. HP Web JetAdmin Overview HP Web JetAdmin allows you to use a Web browse to revise, view, manage and diagnose devices connected to the print server or any standard printer MIB devices.

  • Page 32: Installing Hp Web Jetadmin

    Installing HP Web JetAdmin Before installing the HP Web JetAdmin software, you must have domain administrator or root privileges: Download the installation files from HP Customer Care Online at http://www.hp.com/go/webjetadmin/. Follow the instructions on the screen to install the HP Web JetAdmin software. Note: Installation instructions are also contained in the HP Web JetAdmin install file.

  • Page 33: Configuration From Embedded Web Server

    5. Configuration from Embedded Web Server Overview The Print Server contains an embedded web server that can be accessed through a supported web browser on a LAN, for example, IE 4.0, Netscape 4.0 or above is recommended. The embedded web server provides access to configuration and management pages for the print server and the connected peripheral device.
  • Page 34 Device Name: This option allows you to view device name of the print server. To correct the print server’s device name. System Contact: This option allows you to view contact name of the print server. To check the print server’s contact name who in charge of this device. System Location: This option allows you to view Location name of the print server.
  • Page 35 Manufacturer: This option allows you to view manufacturer of the printer. When the printer connected with the print server, it will be show in the manufacture box. Model Number: This option allows you to view model of the printer. When the printer connected with the print server, it will be show in the model box.
  • Page 36 Mode: This option shows the wireless operation mode of your print server. Type: Infrastructure or Ad-Hoc mode. AP’s MAC Address: This option shows the MAC address of Access Point that associated with print server. SSID: The SSID of your wireless network. Channel Number: Current channel number.
  • Page 37 2.Click TCP/IP, it then as shown in the following picture. Use DHCP/BOOTP: This option allows you to view DHCP/ BOOTP status. If there is a DHCP/BOOTP server on your network, this option allows the print server to obtain IP-related settings automatically from your DHCP server. IP Address: This option allows you to view IP address from the print server.
  • Page 38 General Settings: Print Server Name: This option allows you to view print server’s name would be configured by PSAdmin utility. Polling Time: This option allows you to view polling time from the print server. This function is search for NetWare Server by per time NetWare NDS Setting: Use NDS Mode: Enable or Disable.
  • Page 39 2.Click AppleTalk, it then as shown in the following picture. Zone Name: If no any zone exists, the print server itself displays the zone name as an asterisk (*) in the current AppleTalk Status of the print server in the web browser. Port Name: <ATALK_PS>-xxxxxx-1, where xxxxxx represents the last six digits of the print server’s Node ID.

  • Page 40: Setup Menu

    SNMP Communities: This option allows you to view SNMP communities from the print server. There are two communities that control message from the network management of the print server. SNMP Traps: This option allows you to view SNMP traps from the print server. Setup Menu Meanwhile, you have finished the IP address configuration with print server.
  • Page 41 Device Name: This option allows you to input device name of the print server. To correct the print server’s device name. System Contact: This option allows you to input contact name of the print server. To check the print server’s contact name who in charge of this device. System Location: This option allows you to input Location name of the print server.
  • Page 42 Printer Setup 1. Click Setup, it then appears the sub-menu. 2. Click Printer, it then as shown in the following picture. LPR Queue Name: This option allows you to define the queue name of the print server’s port when you want to use the LPR printing. Wireless Setup: 1.Click Setup, it then appears the sub-menu.
  • Page 43 Basic Settings: Mode: Infrastructure or Ad-Hoc mode. Select SSID or Manually Enter SSID Below: You can use Site Survey to help you assign a SSID or input in manually. Channel: Specify a Channel number that meet your wireless environment. Transmit Mode: B only, G only or Auto. Data Transmit Rates: Choose the transmit rate of your wireless print server.
  • Page 44 Authentication Type: Open System, Shared Key or WPA/WPA2. Encryption: WEP-64/128bit for Open System/Shared Key. Or TKIP/CCMP for WPA/WPA2. TCP/IP Setup: 1. Click Setup, it then appears the sub-menu. Click TCP/IP, it then as shown in the following picture. DHCP/BOOTP: This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP server on your network.
  • Page 45 Subnet Mask: This option allows you to input subnet mask from the print server. The IP address must meet the IP addressing requirements of the network segment. Gateway: This option allows you to input gateway from the print server. This IP address of gateway must meet the router or gateway to go across of the network segment.

  • Page 46: Installing Print Server On Net Ware 4. X /5. X

    Logon Password: This option allows you to input encrypted password from the print server. The print server login to NetWare server that administrator set password from selected print server. NDS Mode: To Enable NDS Mode, if you want to setup NDS environment. To select Tree Name of NetWare then input context name in the Context box.
  • Page 47 Installation Procedure 1. At your file server console, type “load install”. 2. Select “NCF files options”. 3. Select “Edit AUTOEXEC.NCF file”. 4. Add or Modify the “SET BINDERY CONTEXT =” line to include the NDS organization (O) and all organization unit (OU) objects where users are located. For example: SET BINDERY CONTEXT OU=TECH.OU=ABC-USA.O=ABC ;...
  • Page 48 When an unusual condition or activity occurs, the SNMP agent alerts the SNMP manager through SNMP traps. Following list summaries SNMP trap messages that the print server will send out. Activities/SNMP Trap Messages Link Up or Link Down When the network interface on the print server fails, a link down trap message is generated;...
  • Page 49 SNMP Community: The print server supports up to two community names. The default community name is public (case-sensitive), with Read Only access right in default. Support HP WebJetAdmin: This option allows user determine to disable/enable the Support HP WebJetAdmin. SNMP Traps: Enable the function of sending SNMP Authentication Failure trap message to the network administrator, if the community name within a SNMP request is not correct.

  • Page 50: Setting Up A Macintosh Computer

    3.Zone Name: In this option, type an AppleTalk Zone name that you want the print server to belong to or leave it in default (This enables the print server automatically search and link itself to the default zone that is set on the AppleTalk router, if found). We also assume that at least an AppleTalk Zone exists on the network.
  • Page 51 Note: If you select a Zone that the PRINT SERVER doesn’t belong to, as you specified in the previous section, no print server will be displayed in the Step 4. If you are using a PostScript printer you can select the LaserWriter 8 icon. The Chooser window then displays PRINT SERVER (s) featuring the support for AppleTalk protocol, along with its default Chooser Name in the right-hand Select A PostScript Printer dialog box.

  • Page 52: Network Print Monitor

    6. Network Print Monitor Preparation The print server supports TCP/IP, IPX/SPX and NetBEUI protocols under Windows 95/98/Me. Please make sure that the following steps have been completed before proceeding with installation under Windows PC. Select A Desired Protocol TCP/IP The TCP/IP Protocol must be installed. For further information, please read “TCP/IP Protocol Installation”...

  • Page 53: Tcp/Ip Protocol Installation

    TCP/IP Protocol Installation 1. Click Start, point to Settings and select Control Panel. 2. Double click the Network icon. 3. If the TCP/IP Protocol is not already installed, click Add. 4. Select Protocol and click Add. 5. Select Microsoft from the Manufacturers list. 6.

  • Page 54: Netbeui Protocol Installation

    NetBEUI Protocol Installation 1. Click Start, point to Settings, and select Control Panel. 2. Double click the Network icon. 3. If the NetBEUI is not already installed, click Add. 4. Select Protocol and click Add. 5. Select Microsoft from the Manufacturers list. 6.
  • Page 55 10. A message reading, “After your printer is installed, Windows can print a test page so you can confirm that the printer is set up properly.” Select No and click Finish. 11. Double-click the newly created Printer Name icon. 12. Select Printer and Properties. 13.

  • Page 56: Uninstalling Network Print Port On Windows 95/98/Me/Nt/2000/Xp/2003

    By default, the computer will first search for the print server(s) on the network by using the IPX/SPX protocol. If the IPX/SPX protocol is installed, the print server will be displayed along with its Node ID, as shown in Node column. (The last 6 digits of the Node ID, located on the back of the print server unit).

  • Page 57: Tcp/Ip Lpr Port Printing Installation

    7. TCP/IP LPR Port Printing Installation Basic TCP/IP Installation Overview When installing your print server in a TCP/IP environment, IP addresses are essential as a basic means of communications. It is therefore necessary to first assign an IP address to your print server unit.

  • Page 58: Windows Nt Lpr Port Printing Installation

    1. Use the Network Print Monitor utility. 2. Manually specify (using DOS commands or UNIX text-mode commands. This applies to Windows NT/2000/XP/2003 and UNIX systems). Note: The Network Print Monitor can only search for the print server(s) over the same network segment the Windows NT/2000/XP/2003/UNIX computer is located.

  • Page 59: Windows 2000/Xp/2003 Standard Tcp/Ip Port Printing Installation

    7. In the Name of printer or print queue on that server box, type in a printer name, for example, lp1. Click OK. 8. In the Printer Ports box, select Close. Click Next. 10. Select the appropriate printer manufacturer and printer type list and click Next. 11.
  • Page 60 The Add Standard TCP/IP Printer Port Wizard box will then appear as shown the picture as below, and type in the IP address assigned to the print server in the Printer Name or IP Address box, Click Next. In the Add Standard TCP/IP Printer Port Wizard box as shown in the following picture, Select Custom, Click Settings button, and click Next.
  • Page 61 In the Configure Standard TCP/IP Port Monitor box as shown in the following picture, select LPR form Protocol, type in a queue name, for example, lp1. Click OK, and Next. Note: Please DO NOT type any other name than lp1 in this step. Click Finish.
  • Page 62 12. A message reading, “To confirm that the printer is installed properly, you can print a test page”. Select Yes (Recommended) and click Finish. 13. Done.

  • Page 63: Unix Installation

    UNIX Installation After the static IP address is assigned, the Print Server is ready to be configured. For some UNIX/Linux systems, we include the detailed installation procedures below. If you can’t find the installation procedure corresponding to your UNIX system, please refer to your UNIX manuals for details about configuring your UNIX for the “remote printing system”.
  • Page 64 Redhat Linux 9 The Print Server can work under any Linux-based systems, including Slackware, RedHat, etc, without any problems. Basically, the Linux's printing system is based on BSD system. Although many commercial Linux systems are available in the market and their commands will vary slightly, depending upon which version is used, the functionality of the Linux-based variants is exactly the same.
  • Page 65 g. Click Forward button. h. In the Name field, type a user-defined name, click Forward.
  • Page 66 i. In the Queue Type field, choose Networked UNIX. j. In the Server field, type the IP address of print server k. In the Queue field, type a print server’s port name, which connect to the printer. For example: lp1. l.
  • Page 67 n. Choose the model of printer and click Forward. o. Done.

  • Page 68: Upgrading Print Server

    8.Upgrading Print Server Overview Upgrading print server will allow you to upgrade its firmware inside the print server while the newer software version of the print server is available from your local dealer. Depending on the different systems users might use, this chapter is divided into several Sections; please refer to the following lists for your systems.

  • Page 69: Upgrading The Print Server From Unix (Through Tcp/Ip)

    3. Wait for the transfer successful message. 4. Done. Upgrading the print server from UNIX (Through TCP/IP) 1. Log in as root 2. Ensure binary file is located in your current working directory. 3. Type “tftp <print server’s IP address>”. 4.
  • Page 70 Click Upgrade. Done.

  • Page 71: Troubleshooting

    9. Troubleshooting General Troubleshooting Overview The most common problems, which cause the print server to perform improperly, are covered in this chapter. If a problem still exists after reading this chapter, please contact your dealer for technical support. LED Light Indicators The print server is equipped with LED lights to assist in diagnosing problems that are the result of the network and/or the print server hardware itself.

  • Page 72: Print Port Related Problems

    Print Port Related Problems Printing data failure may be caused by a loose connection of the print server to the USB port of the printer. Check to see if any of the pins on the USB connector are damaged. In addition, check the cable connection.

  • Page 73: Moving The Print Server Toa New Segment

    11. Repeat the Steps 8-12 for the other Ethernet adapter. 12. Restart the computer. 13. Done. Moving the print server to A New Segment If the print server is moved from one network segment to another after the initial installation, through the Network Print Port, the print server must be reconfigured on the original Windows NT server or on each Windows 95/98 computer using this print server in order for the print server’s driver on each computer to re-establish a new connection.

  • Page 74: Moving Your Computer Toa New Segment

    9. Done! Moving Your Computer to A New Segment If you are using the print server through the Network Print Port on your NT or Windows 95/98/Me computer and your computer is going to be moved onto another segment, you have to reconfigure the print server on your computer to use your print server.
  • Page 75 B. The print server's IP address is duplicated or is as same as another computer's IP address on the network. If this is the case, please consult your network administrator to obtain an unused IP address for your print server. C.
  • Page 76 5. Type "edit config.txt" to modify this configuration file. 6. In your editor, modify "BoxIPAddress" field from "0.0.0.0" to "192.72.214.100". Leave other options as default and do not change their values. When done, save this new file and quit from your editor. Please note, in this step you must specify an IP address which is valid on Segment B, such as 192.72.214.100 in this example, rather than 192.72.214.68.

  • Page 77: Appendix

    Appendix: Diagnostic Mode (Wireless) If you have no the twisted-pair cable to configure print server and have problems to configure it on wireless network. Please refer to the following steps: 1. Change the print server to diagnostic mode by switching the DIP switch to DIAG mode. 2.
  • Page 78 6. Done. The print server will restart. 7. Switch the DIP back to normal mode and change your wireless adapter setting. Rendezvous with Mac OS X 10.3.7 1. Enable the Rendezvous settings from the print server’s WEB configuration.
  • Page 79 2. Click "Printer Setup Utility” from the bottom toolbox of Mac.
  • Page 80 3. Click "Add". 4. Choose "Rendezvous", and then Mac OS will automatically search the print server on the network.
  • Page 81 Choose the proper printer model that connected to print server, and then click "Add".
  • Page 82 6. Now the network printer with Rendezvous has been successfully installed. SMB Printing with Windows XP 1. Enable the SMB settings from the print server’s WEB configuration. Assume your computers use the “WORKGROUP” as the SMB workgroup name in Windows. Please assign the same SMB name to your print server.
  • Page 83 2. Now you can find the print server from the SMB workgroup of Windows. Then, double click it.
  • Page 84 3. Double click it again. 4. Now you have to install the printer’s driver.
  • Page 85 5. Choose it from the “Add Printer Wizard”. 6. Install printer successfully. 7. Now, you can find your printer’s icon and you can use the SMB printing mode.
  • Page 86 Reset Button Reboot the Print server: 1. Verify the power of print server is turned on. 2. Press the reset button once, and then release it. WARNING: This will restart the print server and stop all on-going and pending print jobs! Perform a Factory Default: 1.
  • Page 87 DHCP client: off IP address: 192.168.2.15...

  • Page 88: Frequently Asked Questions

    Frequently Asked Questions Question A Print jobs are sent to the print queue successfully, but fail to be sent to the printer. Possible explanations 1. The Print server Name/Print Queue configuration in PCONSOLE is incorrect. 2. The Print server name specified and stored in the print server memory doesn’t match the same one set in PCONSOLE.
  • Page 89 Question D The Power LED light keeps blinking after POST. Possible explanation and solution The last upgrade process was not completed. The print server must be upgraded again by using the PSAdmin. Please see Chapter 3 for details. Question E The PSAdmin reports “Create Print server Error”, “Create Printer Error”, or “Create Print Queue Error”...

  • Page 90: Additional Installation Instructions

    Additional Installation Instructions Panasonic KX-P6100/6300/6500 If you are using a Panasonic KX-P6100/6300/6500 laser printer with the print server through the Network Print Port under Windows 95/98, please redirect the printer named “Panasonic KX-P6100 PCL” or “Panasonic KX-P6300 PCL”, or “Panasonic KX-P6500 PCL”...
  • Page 91 FOR TECHNICAL SUPPORT, CALL: From U.S.A. and Canada (24 hours a day, 7 days a week) (800) SMC-4-YOU; Phn: (949) 679-8000; Fax: (949) 679-1481 From Europe : Contact details can be found on www.smc.com INTERNET E-mail address: techsupport@smc.com Driver updates: http://www.smc.com/index.cfm?action=tech_support_drivers_downloads World Wide Web: http://www.smc.com/...

This manual is also suitable for:

Smcwps-gWps-gEz connect smcwps-g

Table of Contents