SMC Networks EZ Networking SMC2621W-P User Manual page 28

5. On this screen, select [Custom], and click the [Settings] button.
Figure 7. Port Settings Screen (LPR byte counting should
bbe enabled if it is needed by the printer)
6. On the above screen:
•
Select [LPR] in the [Protocol] section.
•
Enter a [Queue Name] (L1 for Port 1, L2 for Port 2 if the
Wireless Print Server has 2 printer ports).
•
Ensure the [LPR Byte Counting Enabled] setting is
Checked.
•
Click [OK] to confirm your changes and close this screen.
7. Follow the prompts to complete the Wizard.
Windows Peer-to-peer Printing
23