SMC Networks EZ Networking SMC2621W-P User Manual page 102

Problem No. 9 The colors on my printed output do not match the
Solution No. 9
Problem No. 10 When I send a print job, I get a PostScript
Solution No. 10
colors on my computer screen.
When the printer receives a color file, it tries to match
the printed output color to the screen color.
Sometimes the printer cannot match up the colors as
closely as wanted. To alleviate this problem, perform
the following steps:
•
Choose [Calibrated Color/Grayscale] in the [Print]
pop-up menu in the [Print Options] dialog box. The
printer will make adjustments to match the colors.
•
Check your monitor to make sure all settings (for
example, brightness) are adjusted correctly.
Command error or no print out.
Check the communication protocols. The computer,
Wireless Print Server and printer must all be
configured to the same communication
protocol. (either Binary or ASCII).
To configure your system:
Choose which protocol you are going to use.
1.
You should check your printer; it may not give
you a choice.
Set your printer to the correct protocol.
2.
Use the computer's [Print] submenu to configure
3.
your computer to use the protocol you have chosen.
Configure the Wireless Print Server to use the
4.
same protocol as the printer and computer.
AppleTalk (Macintosh)
99